Hanging Plexi Prints with Command Strips
How to Apply Command Strips Video
Tips
Surfaces Command Strips Stick To
Surfaces Command Strips DO NOT Stick To
Steps To Apply Command Strips
Step 1: Wipe wall with rubbing alcohol. Do not use household cleaners or water.
Step 2: Separate strips. Click strips together.
Step 3: Remove one side of liners. Stick on frame as shown. Press firmly.
Step 4: Remove remaining liners. Press frame firmly to wall.
Step 5: To ensure adhesive holds, temporarily remove frame from wall to reinforce strips. Peel frame as shown. Press each strip on wall for 30 sec.
Step 6: Wait 1 hour for adhesive to build. Align strips. Press frame until each pair of strips clicks.
Steps To Remove Command Strips
Step 1: Grab bottom corners and peel frame from wall. Do not pull straight off.
Step 2: Never pull away from wall.
Step 3: Pull easy-off stretch strips slowly down against the wall at least 15 inches (38 cm) to release.
For more information about Command Strips by 3M, visit their site at command.com.